CTFID Configuration Settings | en 29
Bosch Security Systems, Inc. User’s Manual F.01U.141.545 | 3.09 | 2009.10
5.2 Uploading/Downloading Specific Setting Changes
1. In Offline mode, open the configuration file that contains the current settings for the
device.
Figure 5.3 Uploading and Downloading Specific Changes
2. Navigate to the setting(s) you want to change. For example, to change the Max Gain
Level on an AutoDome Security Camera, navigate to the Offline Configuration window,
Camera Setting Group 1.
3. Move the Max Gain Level slide from 2 to 6.
4. Click the check box(es) in the Select column.
5. Click the Upload or Download Configuration button.
A confirmation dialog box opens to confirm that you want to replace the selected settings
in the offline configuration file with the specific current device settings. Only the selected
settings are uploaded or downloaded.
6. Click Yes to begin uploading or downloading the settings. Since this can be a lengthy
operation, depending on the number of configuration changes made, a progress bar is
displayed at the bottom of the window to indicate the progress status of the operation
(see Figure 5.2).
7. A confirmation message is displayed.
NOTICE! If you do not have such a file, connect to the device in Online mode. The current
settings are automatically downloaded upon connection. Click the Save button to display the
Save As dialog box. Navigate to the folder where the file is to be saved. Name the file and click
OK. In Offline mode, open the configuration file you saved.
NOTICE! If you have a number of devices that require the same change of settings, you can
move from device to device, leaving the application open and uploading or downloading the
same Select settings from the Offline mode configuration file. The Select check boxes are
NOT saved when you save and close the configuration file.
