Page 5
ALLURE
®
QSE1 SERIES
RANGE HOOD
OPERATION
Fan: The 3-position rocker switch (on the left) controls the fan.
The left position is low speed, center position is off, and right
position is high speed. An indicator light shows that the fan is on.
Light: The 3-position rocker switch (on the right) controls the
lights. The left position is low light intensity, center position is off,
and right position is high light intensity.
LIGHT
LENS
2 Grasp Lamp at base, tilt down and pull out to remove.
Replace with 42W Fluorescent Lamp GX24Q-4. Night Light
uses 4W, C-7 bulb.
1 Pull Tab on Light Lens forward and pull down to remove
lens.
!
CAUTION: Bulbs may be hot! Refer to bulb packag-
ing for further information.
42W
FLUORESCENT
LAMP GX24Q-4
LAMP REPLACEMENT
3 Replace light lens.
4W
NIGHT LIGHT
C-7 BULB
WARNING: To reduce the risk of electric shock,
disconnect from power supply before cleaning.
Aluminum mesh filters: Clean frequently using hot water and
a mild detergent. Filters are dishwasher safe.
To clean hood: Remove filters. Use a damp cloth and a mild
detergent to wipe all grease-laden surfaces. Use care when
cleaning fan blade - it must not become bent or misaligned. DO
NOT ALLOW WATER TO ENTER MOTOR. Make sure all surfaces
are completely dry before re-installing filters and restoring power.
Motor is permanently lubricated. Do not oil or disassemble motor.
CLEANING
