ATTACHING THE EMBROIDERY FRAME
206
ATTACHING THE EMBROIDERY FRAME
Press → → → → in this order to display a video
example of attaching the embroidery frame (see page 46). Follow the steps explained below to complete
the operation.
a
Press the “Presser Foot Lifter” button to
raise the presser foot.
b
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
a Embroidery frame holder
b Embroidery frame guide
c
Slide the embroidery frame into the holder,
making sure to align the embroidery frame’s
with the holder’s .
a Arrow mark
d
Lower the frame-securing lever to be level
with the frame to secure the embroidery
frame in the embroidery frame holder.
a Frame-securing lever
• Wind and insert the bobbin before attaching the embroidery frame.
• If the frame-securing lever is not lowered, the
following message appears. You cannot start
sewing until you lower the frame-securing
lever.
