A SERVICE OF

logo

Open as PDF
next previous
9
TheEthernetConverterManagerwillsearchforall
BuffaloEthernetConvertersonyournetwork.The
processusuallytakeslessthanoneminute.Once
completed, the Search Resultswindowwillappear.
Search ResultswilllistallBuffaloEthernetConverters
onthenetwork.IfthereismorethanoneEthernet
Converterinthelist,selecttheoneyouwouldliketo
congure.PresstheIP Settings button to continue
conguration.
The IP Address Setupwindowwillopen.Checkthe
boxnexttoUse DHCP and press the OK button. The
EthernetConverterwillreboot;thisprocessmaytake
as long as a minute. The Ethernet Converter Manager
willthenre-scanthenetworkforEthernetConverters.
NOTE: IfyouwanttogiveyourEthernetConverter
astaticIPaddress,thanyoucanskipcheckingUse
DHCPandenteryourownIPAddressandSubnet
maskinthecoorespondingelds.IfusingastaticIP
address,itisrecommendedtopickoneinsideyour
existingnetwork'ssubnet.