46
E Spin the rollers while wiping them clean with a firmly wrung
cloth dampened with water or a mild detergent.
There are 26 roller positions, as shown in the diagram below.
NOTE
• Use cotton swabs to clean the rollers in locations that are too narrow for
your fingers.
• Roller in position c is turned by the roller in position a. Turn the roller in
position a to wipe the rollers.
• Rollers in positions h, j, and l are turned by the roller in position k.
Turn the roller in position k to wipe the rollers.
• Rollers in positions u to z are turned by the roller in position m. Turn the
roller in position m to wipe the rollers.
• Rollers in positions a to c are replaceable. (See “Replacing the Rollers,”
on p. 53.)
F Use cotton swabs that are commercially available to clean the
entire scanning glass.
G Close the Back Maintenance Cover.
Ԙ
ԙ
Ԛ
ԛ
Ԝ
ԝ
Ԟ
ԟ
Ԡ
ԡ
Ԣ
ԣ
Ԥ
ԥ
Ԧ
ԧ
Ԩ
ԩ
Ԫ
ԫ
Scanning Glass
