6-6
Changing the Polling Box Settings
Follow this procedure to change the settings of the polling box setup file.
1
Press Additional Functions.
2
Use 4 (–) or e (+) to select 4.FAX SETTINGS
→ press OK
.
→
• If necessary, see steps 1 to 3 of “Setting Up a Polling Box”. (→ p. 6-3)
3
Use 4 (–) or e (+) to select 6.POLLING BOX
→ press OK
.
→
4
Use 4 (–) or e (+) to select 2.CHANGE DATA
→ press OK
.
→
Ex:
5
Enter the password (up to seven digits) using the numeric keys → press OK.
• If you have not previously set a password, skip this step, and proceed to step 6.
Ex:
→
• If you make a mistake while entering the password, press Function → Clear → enter the correct password.
6
Use 4 (–) or e (+) to display the setting you want to change → press OK.
• To change the settings for an item, follow the same procedure you used for the initial setup of the polling box.
(→ p. 6-3)
Ex:
• To change the password, you have to first enter the old password (it is not displayed as you enter it)
→ press OK → enter a new password (it is displayed as you enter it) → press OK.
7
When you are finished making changes, press Stop/Reset to return to the Standby display.
