
NOTE: The LED nightlight will also work when the mist is switched off.
Cycle Function
The cycle function allows you to set the humidifier to cycle on and off. For Example:
The humidifier is set to switch ON for one hour. After one hour the humidifier will switch
OFF for three hours and then will switch ON again for one hour. The cycle will continue
until automatic shut-off kicks in. The humidifier will cycle a maximum of 12 hours.
Setting Cycle Function
1. Press and hold the FLOW / SET button until the first two numbers blink.
2. If the clock was not set, please set clock now before continuing with cycle
function (see “Setting the Clock”).
3. Once the clock is set, press the FLOW / SET button until the double arrow
appears in the LCD display. At this point, the first two numbers will blink.
4. Press the LIGHT / FUNCTION button to set the cycle ON hour.
5. Press the FLOW/ SET button and the minutes will blink.
6. Press the LIGHT / FUNCTION button to set the cycle ON minutes.
7. Press the FLOW/ SET button to get into the cycle OFF setting mode. Set the OFF
time in the same way as the ON cycle.
NOTE: You are setting the number of hours that you want the humidifier to cycle
on and off.
8. Press the LIGHT / FUNCTION button to set the cycle OFF hour.
9. Press the FLOW / SET button and the minutes will blink.
10. Press the LIGHT / FUNCTION button to set the cycle OFF minutes.
11. Press the FLOW/SET button to get back to the normal LCD clock display.
Activating Cycle Function
1. Press and hold the LIGHT / FUNCTION button for two seconds until the double
arrow appears.
2. After two seconds, the cycle function will begin.
The humidifier will switch ON and OFF using the preset hours. To switch the humidifier
OFF during the cycle ON/OFF period, press and hold the CANCEL button until the
humidifier switches OFF.
NOTE: If the double arrows (cycle symbol) blink several times, the times was not set
correctly. Please repeat the Setting Cycle Function procedure.
Deactivating Cycle Function
1. Press and hold the POWER / CANCEL button.
Alarm Mode
The humidifier can be used as an alarm clock. To set the alarm clock the humidifier
must be in the OFF mode. The alarm clock can be used in the ON or OFF mode.
Setting the Alarm
1. Press and hold the FLOW/SET button until the first two numbers blink.
2. If the clock was not set, please set clock now before continuing with cycle
function (see “Setting the Clock”).