COLORado™ 6 User Manual 17 7/1/2009 4:46 PM
Menu Map
000 ~ 255
(0 ~ 100%)
*Strobe range
is 0 ~ 20
User can combine Red, Green and Blue to
generate a custom color
Select strobing frequency between 0 and 20 Hz
Sets the DMX starting address
9-channel mode; RGB control for each module
4-channel mode; RGB+D mode
Choose from 8 Automatic programs
Assigns the ID address to a fixture
Either enables or disables ID addressing
Sets the number of ADAS channels for use
when automating DMX channel assignment
Enables the Automatic DMX Addressing
System
When activated the DMX512 address assigned
by the ADAS will become permanent on the
fixture
Resets fixture to factory default settings
Modify the dimming curve starting value
When password is set to on the control panel
will ask for a password each time the control
panel is accessed
Use UP and DOWN buttons to set and press
SET to confirm
Note! If you forget the password use the
following factory password:
UP, DOWN, UP, DOWN, UP, UP, DOWN,
DOWN
Manual Power ON/OFF
The COLORado™ 6 can be turned on and off using the control panel.
When {MENU} is displayed in the LCD panel, hold down the (EXIT) button for 3
seconds to turn off the fixture.
Hold the {EXIT} button for 3 seconds to turn power on.
