A SERVICE OF

logo

Open as PDF
next previous
6. Lower the headlamp to allow the vertical adjustor
to clear the tie bar.
7. Turn the headlamp forward and upward to remove
it from the grille.
8. Turn the bulb connector counterclockwise and pull
it out of the housing.
9. Without removing the headlamp assembly itself,
remove the bulb socket from the back of the
headlamp on the driver's side.
10. Turn the bulb counterclockwise one quarter turn to
remove it from the socket.
11. On the passenger's side, turn the bulb clockwise
one turn.
12. Install the new bulb into the socket then reinstall it
into the headlamp assembly.
13. Reverse the steps to reinstall the headlamp
assembly.
6-49