A SERVICE OF

logo

Installation Instructions CSA110
3
TOOLS / PARTS FOR INSTALLATION
A (2)
[Interface extender]
B (4)
5-16"
1/2"
ASSEMBLY AND INSTALLATION
NOTE: The CSA110 extends the LVS1U to accept a display
with an 800mm x 400mm mounting pattern.
1. Line up one interface extender (A) with each LVS1U interface
bracket (not included), aligning the stud from back of interface
extender through interface bracket. (See Figure 1)
2. Fasten interface extender to interface bracket using two 5/16"
nuts (B) over studs on each interface extender. (See Figure 1)
Figure 1
3. Complete the installation following instructions included with
the LVS1U (beginning with Installing Interface Brackets
section).
2
(A)
(B) x 4
LVS1U interface
bracket