
43
Specifications
All specifi cations are accurate at the time of printing. Classé reserves the right to
adjust specifi cations without notice.
Power output (both channels driven) 100W/ch continuous rms @ 8Ω
200W/ch continuous rms @ 4Ω
Frequency response 10Hz – 22kHz (+0/-0.1dB)
10Hz – 155kHz (+0/-3.0dB)
Phase less than -10° @ 22kHz
Signal-to-noise ratio 95dB typical
Channel separation better than 95dB @ 20kHz
Noise floor (FFT) all peaks less than -90dBV
(10Hz – 80kHz)
Distortion (THD + noise) 0.005% @ 8Ω
(unweighted, 0.8Vrms/1kHz input, 10Hz – 80kHz)
Maximum input voltage 3.8Vrms (single-ended)
7.8Vrms (balanced)
Voltage gain range -100dB to +14dB
Sensitivity (SSP input) 0.5Vrms for rated output (single-ended)
1.0Vrms for rated output (balanced)
Input Impedance 100kΩ
Output Impedance (main output) 100Ω
Input complement 1 balanced (XLR), 4 single-ended (RCA)
Output complement 2 single-ended (RCA)
Crosstalk (any input to any output) better than -95dB
Rated power consumption
(as per IEC60065 - para.2.3.10) 260W
Idle power consumption 125W
Mains voltage specifi ed on rear panel decal
(cannot be changed by user or dealer)
Dimensions (not incl. controls or connectors) Width: 17.5” (445mm)
Height: 4.75” (121mm)
Depth: 16.5” (419mm)
Shipping weight 59lbs (27kg)
Net weight 50lbs (23kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
Internet: http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.