Crestron CEN-TIA Telephone Interface Module
Program Checks
Actions that can be performed on the CEN-TIA vary depending on whether it is
connected via Cresnet or Ethernet.
Cresnet Connections
For Cresnet connections, using Crestron Toolbox, display the network device tree
(Tools | Network Device Tree) to show all network devices connected to the control
system. Right-click on the CEN-TIA to display actions that can be performed on the
CEN-TIA.
Ethernet Connections
For Ethernet connections, display the “System Info window (click the
icon) and
select the Functions menu to display actions that can be performed on the CEN-TIA.
Be sure to use the Crestron Toolbox to create the CEN-TIA IP table.
• Select Functions | IP Table Setup.
• Add, modify or delete entries in the IP table. The CEN-TIA can have only
one IP table entry.
• A defined IP table can be saved to a file or sent to the device.
Edit the control system’s IP table to include an entry for the CEN-TIA. The entry
should list the CEN-TIA’s IP ID (specified on the CEN-TIA’s IP table) and the
internal gateway IP address 127.0.0.1.
Operations Guide – DOC. 6414 Telephone Interface Module: CEN-TIA • 21
