For the reservation of finishing time
! Set your program as the
above procedure,
remaining last step.
* Press the course selection button.
* Press the procedure selection button.
*
But wool/suit course can not reservation.
@
Press reservation button until
the digital monitor displays the
finishing time you want.
# Press Start/Hold to start.
14
For the partial process or the combinations, or for adding time of each process.
step 1. Press power switch.
step 2. Press program button until the indicaing lamps make the combinations you want.
If only spin lamp is turned on, that means you will operate your washer for spin only.
If rinse and spin lamp are turned on, that means you will operate your washer for rinse and spin.
If add lamp is turned on with other process lamps, that means the time of the corresponding
process will increase by 1~2 minutes, that is, if add is on with wash, rinse and spin, the time of each
process will increase by 1~2 minutes. (Wash: add 2 min., Rinse: add 1 min., Spin: add 1 min.)
step 3. Press water level selector as your decision.
step 4. Press Start/Hold to start.
! Pressing @ Selecting $ Pressing
the Power Water level # Selecting Course the Start/
Switch Hold Switch
Wash & Rinse
& Spin
Only Spin
Add & Wash
Add & Rinse
& Spin
Add & Spin
Add & Wash
& Rinse & Spin
Only Wash
Rinse & Spin
End of
Washing
It is
Informed
by buzzer.
GUIDES FOR OTHER USEFUL PROGRAMS
