![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/49/749906d8-e275-48b5-98b5-d4351efd9e04/749906d8-e275-48b5-98b5-d4351efd9e04-bgf.png)
Configuration Settings
Addendum 11
• New Tag Timeout: The amount of time to wait between tags before
painting will automatically stop. This is the maximum amount of
time spent waiting for new tags after a tag has been read. If set to
Infinite, then painting will stop only when the trigger is released,
a
Total Read Timeout occurs, or the minimum number of tags have
been read.
•
Minimum Tag Count: This the minimum number of tags to attempt to
read. If this minimum number of tags have been read during a paint-
ing operation, then painting will stop. If set to Infinite, then
painting will stop only when the trigger is released, or one of the tim-
eout conditions is met.
Firmware Version
Select to display the current Firmware ver-
sion.
1. Under
Decoding Properties, go to
Configure > RFID > Firmware.
The current firmware installed in
the RFID module will be displayed.
2. To update the RFID module firm-
ware, tap the
Browse button and
then select the file containing the
new firmware.
3. Tap the
Update button to update the
RFID module firmware.