A SERVICE OF

logo

6. Tighten the screw.
7. Flip the computer and tighten the screw that secures the palmrest assembly.
8. Install:
a. Keyboard
b. System Fan
c. Hard Drive
d. Battery
e. Base Cover
9. Follow the procedures in After Working Inside Your computer.
Removing the Heatsink
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. Base Cover
b. Battery
c. Hard Drive
d. WLAN Card
e. System Fan
f. Keyboard
g. Base frame
3. Perform the following steps as shown in the illustration:
a. Loosen the screws that secure the heatsink to the computer [1].
b.
4. Lift the heatsink from the computer.
23