Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Next steps
If applicable, install the front bezel.
Removing a 1.8 inch hard drive from a hard drive carrier
Prerequisites
1. Ensure that you read the Safety instructions.
2. Remove the hard drive carrier from the system.
Steps
1. Turn the hard drive carrier.
2. Pull the rails of the hard drive carrier and lift the hard drive out of the hard drive carrier.
Figure 58. Removing and installing a 1.8 hard drive into a hard drive carrier
1. hard drive carrier 2. hard drive
Installing a 1.8 inch hard drive into a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
Insert the hard drive into the hard drive carrier with the connector end of the hard drive toward the
back.
127
