A SERVICE OF

logo

Ensure that you read the Safety instructions.
Steps
1. If you are installing a new sled, remove the plastic cover from the I/O connector(s) and store for
future use.
2. Press the release button on the sled handle to release the sled handle.
3. Align the sled with the sled bay in the enclosure.
4. Slide the sled into the enclosure until the sled connectors are firmly engaged with the midplane
connectors.
5. Press the sled handle until the release button clicks into place.
Next steps
Turn on the sled.
Related Links
Removing the sled
39