4-60 Dell Inspiron 3000 Series Service Manual
12.1-Inch LCD Inverter Board
.
Figure 4-42. 12.1-Inch Inverter Board Removal
To remove the 12.1-inch inverter board, follow these ste
s:
1. Remove the front bezel.
See “12.1-Inch LCD Front Bezel” found earlier in this section.
2. Remove the LCD
anel.
See the
revious subsection, “12.1-Inch LCD Panel.” You ma
not want to
remove this
anel if
ou are re
lacin
onl
the inverter board.
3. Disconnect the inverter cable from connector CN2 at the bottom of the
inverter board, and remove the cable.
4. Remove the inverter board from the back cover.
The inverter board is mounted on two
lastic sna
s. It is held in
lace b
these sna
s and Ka
ton ta
e near the bottom of the board.
When re
lacin
the inverter board, make sure
ou have the correct board. The
inverter board for a 12.1-inch IBM LCD assembl
is different from the inverter
board for a 12.1-inch Samsun
LCD assembl
.
