A SERVICE OF

logo

Open as PDF
next previous
Installing the Display Assembly
1. Place the display assembly on the computer.
2. Tighten the screws to secure the display assembly to the computer.
3. Route the antenna cables through the routing channel.
4. Connect the antenna cables to the computer.
5. Route and connect the LVDS cable.
6. Place the LVDS bracket in its slot.
7. Tighten the screws to secure the LVDS bracket to the computer.
8. Route and connect the antenna cables that are connected to the wireless solutions.
9. Flip the computer and tighten the screws at the bottom.
10. Install the:
a) keyboard
b) palmrest
c) base cover
d) battery
e) ExpressCard
f) SD card
11. Follow the procedures in
After Working Inside Your Computer
.
Removing the Camera
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) battery
b) display bezel
3. Peel away the conductive tape.
51