30 Operating the Monitor Operating the Monitor 31
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: Ifyou change the settings and then either proceed to another
menu or exit the OSD menu, the monitor automatically saves those
changes.The changes are also saved if you change the settings and
then wait for the OSD menu to disappear.
1. Press the MENU button to launch the OSD menu and display the main
menu.
NOTE: Auto Adjust is only available when you use the analog (VGA)
connector.
2. Press the and buttons to move between the setting options. As
you move from one icon to another, the option name is highlighted. See
the following table for a complete list of all the options available for the
monitor.
NOTE: Auto Adjust is only available when you use the analog (VGA)
connector.
3. Press the or
button once to activate the highlighted option.
4. Press the and buttons to select the desired parameter.
5. Press to enter the slide bar and then use the or button,
according to the indicators on the menu, to make your changes.
6. Press the button once to return to the main menu to select another
option or press the button two or three times to exit from the OSD
menu.
Icon
Menu and
Submenus
Description
Energy Use This meter shows the energy level being consumed
by the monitor in real time.
Brightness/
Contrast
Use this menu to activate Brightness/Contrast
adjustment.
Brightness Brightness adjusts the luminance of the backlight.
Press the button to increase brightness and
Press the button to decrease brightness (min 0 ~
max 100).
NOTE: Brightness control will be greyed out during
“Screen dim” in PowerNap option when screen
saver is activated.
Contrast Adjust Brightness first, and then adjust Contrast only
if further adjustment is necessary.
Press the button to increase contrast and Press
the button to decrease contrast (min 0 ~ max
100).
The Contrast function adjusts the degree of
dierence between darkness and lightness on the
monitor screen.
