Dell T110 Manual

A SERVICE OF

next previous

74 Installing System Components

Figure 3-12. Removing and Installing the Cooling Shroud

Installing the Cooling Shroud

1

Align the holes on the cooling shroud with the alignment guides on the

system fan.

2

Hold the touch points on the cooling shroud and carefully lower the

cooling shroud into the system. Ensure that no cables are under the edges

of the cooling shroud.

3

Replace the expansion card stabilizer. See "Installing the Expansion Card

Stabilizer" on page 72.

4

Close the system. See "Closing the System" on page 58.

1 cooling shroud 2 expansion card stabilizer

3 release tab 4 cooling shroud touch points (2)

1

4

3

2

Mayzie_HOM.book Page 74 Monday, August 31, 2009 9:33 PM