94 Antenna Module
Replacing the Antenna Module
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the screw holes on the antenna modules with the screw holes on the
chassis and place the antenna modules on the chassis.
3
Replace the four screws that secure the antenna modules to the chassis.
4
Route the antenna cables through the routing guides on the chassis.
5
Connect the antenna cables to the connectors on the Mini-card.
6
Follow the instructions from step 2 to step 5 in "Replacing the Processor
Heat-Sink Fan" on page 76.
7
Replace the middle frame. See "Replacing the Middle Frame" on page 72.
8
Replace the system-board shield. See "Replacing the System-Board Shield"
on page 54.
9
Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
10
Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.
1 antenna modules (2) 2 screws (4)
2
1
book.book Page 94 Thursday, May 3, 2012 1:21 PM
