4. Press the or button until the required language is
displayed;
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Energy Saving
Use this function to enable or disable “Energy saving” mode.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To enable or disable the function, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Energy saving” is displayed;
3. Press the OK button. “Disable?” is displayed (or “Enable?”
if the function has already been disabled).
4. Press the OK button to disable or enable the function or
the ESC button to exit the menu.
When the function is active, if the machine is not used for
about 1 minute, “Energy saving” is displayed.
Please note!
• Toexit“Energysaving”mode,pressanybutton,thenpress
the button corresponding to the drink you want to make.
• Afewsecondsmayelapsebetween“Energysaving”mode
and delivery of the rst drink; “Preparation underway...” is
displayed.
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Adjust time” is displayed;
3. Press the OK button. The hours ash on the display;
4. Press the or button to change the hours;
5. Press the OK button to conrm. The minutes ash on the
display;
6. Press the or button to change the minutes;
7. Press the OK button to conrm;
8. Press the ESC button to exit the settings menu.
Please note!
The time is displayed when the appliance is in stand-by or
energy saving mode. If the time has not been adjusted, “0:00”
ashes on the display.
Auto-Start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must be set correctly.
To enabled Auto-on, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-start” is displayed;
3. Press the OK button. “Enable?” is displayed;
4. Press the OK button. The hours ash on the display;
5. Press the or button to select the hours;
6. Press the OK button to conrm. The minutes ash on the
display;
7. Press the or button to change the minutes;
8. Press the OK button to conrm. The symbol appears
under “Auto-start” on the display.
9. Press the ESC button to exit the menu. When the appliance
is in stand-by, the symbol appears next to the clock
to indicate that auto-start has been programmed.
To disable the function:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-start” is displayed;
3. Press the OK button. “Disable?” is displayed;
4. Press the OK button to conrm;
5. Press the ESC button to exit the menu. When the appliance
is in stand-by, the symbol is no longer displayed.
Auto-O (Stand-by)
The appliance is set by default to go o if not used for two
hours.
The time can be changed so that the appliance switches o
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-o, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-o” is displayed;
3. Press the OK button;
4. Press the or button until the required time (15 or 30
minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Auto-o is programmed.
Setting the temperature
To modify the temperature of the water used to make the
coee, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Set temperature” is
displayed;
3. Press the OK button;
4. Press the or button until the required temperature is
displayed (l = low; llll = high);
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 17.
Statistics function
This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Statistics” is displayed;
3. Press the OK button;
4. By pressing the or button, you can check:
- how many coees have been made;
- how many cappuccinos have been made;
- how many times the machine has been descaled;
- the total number of litres of water delivered.
5. Press the ESC button twice to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set). To reset all settings, proceed as follows:
1. Press the MENU button to enter the menu;
2. Press the or button until “Default values” is
displayed;
3. Press the OK button;
4. The message “Conrm?” is now displayed;
5. Press the OK button to conrm and exit.
MAKING COFFEE
Please note!
A few seconds may elapse between energy saving mode and
delivery of the rst coee.
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 7)
repeatedly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee.
To select the quantity of coee, press the button (g.
8) repeatedly until the message corresponding to the required
quantity of coee is displayed:
