86
Advanced Operation
2
Resetting for individual buttons
1
2
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
Press the 9
, 7, 6
button (9
→→
7
→→
6) in that order.
• The IR segment blinks twice and the learning
function resetting mode is set.
Resetting the remote control unit
Resetting the learning function
3
Press the MODE SELECTOR button for the
device to be reset.
4
Press the button to be reset twice.
• The IR segment blinks twice.
1
2
3
Press the SYSTEM CALL button (1, 2 or 3) you
want to reset.
Press and hold the
RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
Press the 9, 7, 8 button (9
→→
7
→→
8) in that order.
• The IR segment blinks twice and the system call
resetting mode is set.
4
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
Resetting the system call function
1
2
3
Press the 9, 8, 4 button (9
→→
8
→→
4) in that order.
• The IR segment blinks twice and the punch through
function resetting mode is set.
Press the MODE SELECTOR button for the
device to be reset (TV or SAT/CBL).
Press and hold the
RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
4
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
Resetting the punch through function
1
2
Press the 9, 8, 1 button (9
→→
8
→→
1) in that order.
• The IR segment blinks 4 times and the learning
function resetting mode is set.
• Clear the entire system memory, which will restore
the remote control unit to the factory default
settings.
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
Resetting all the settings
2
Resetting for individual devices
1
2
Press and hold the RC SETUP button for at
least 3 seconds.
• The IR segment blinks twice.
Press the 9, 7, 6 button (9
→→
7
→→
6) in that order.
• The IR segment blinks twice and the learning
function resetting mode is set.
3
Press the MODE SELECTOR button for the
device to be reset twice.
• The IR segment blinks twice.
NUMBER
RC SETUP
IR segment
MODE SELECTOR
SYSTEM CALL
