40
Auto search function
• The set is equipped with a function for searching for the registration
number if you do not know the preset code (a 4-digit number) when
setting the preset memory.
1
2
For TV, DBS or CABLE components, turn on the component’s
power. For CD, MD, TAPE, DVD, VCR and VDP component’s,
turn on the component’s power and load a disc or tape.
Press the power ON/SOURCE button and the OFF button at
the same time.
• “SET UP” appears on the remote control unit’s display.
If you press the power OFF button late at step 6, press the D and
H cursor button once to move to the next code or back to the
previous code one step at a time.
D button: Next code
H button: Previous code
Auto search resumes when you move ahead from the code at
which you stopped.
Press the ENTER button.
Use the D and H cursor buttons to display “AUTOSEARCH”
on the remote control unit, then press the ENTER button.
Use the D and H cursor buttons to display the mode of the
component to be searched for on the remote control unit’s
display, then press the ENTER button.
• The registration codes are transmitted in order.
When the component operates, press the POWER OFF
button.
• The mode and the registered number appear on the remote
control unit’s display.
The channel switches on the TV, DBS or CABLE device and
playback stops on a CD, MD, tape, DVD, VCR or VDP player.
Press the ENTER button.
• “COMPLETE” is displayed on the remote control unit’s
display and the selected code is preset.
