ENGLISH
37
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL and SR) together. Use it for
example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1
Select “FADER”.
(Main unit) (Remote control unit)
2
Press the button to reduce the volume of the front
channels, the button to reduce the volume of the rear
channels.
The channel switches in the order shown below each time
this button is pressed.
*
The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
*
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
Dolby Surround Pro Logic mode
1
Select the Dolby Surround Pro Logic mode.
• The Dolby Pro Logic indicator lights.
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
This is only displayed when setting the fader control.
Light
NOTE:
• There are four Dolby Surround Pro Logic modes (NORMAL,
PHANTOM, WIDE and 3CH. LOGIC). The AVR-2801/981 sets
the mode automatically according to the types of speakers set
during the system setup process (page 15).
