Opening and closing the drawer (This operation only works
while the power is on.)
1. Press the POWER switch to turn on the power.
2. Press the OPEN/CLOSE button (
5).
How to load a disc
• Make sure the drawer is completely open.
• Hold the disc by the edges and place it on the disc tray. (Do
not touch the signal surface, i.e., the glossy side.)
• Set the disc properly in the tray according to its size.
Set 8cm discs in the center hole.
Set 12cm discs in the outer hole.
• When the drawer is opened during the stop mode, discs can
be loaded in the disc 1 to disc 4 trays. If the DISC SKIP button
is pressed, the carousel turns and a disc can be loaded in the
disc 5 tray.
When the drawer is opened during the play mode, it is
possible to load and unload discs in all of the disc trays other
than the one whose disc is currently playing. In this case, the
DISC SKIP button will not operate.
• Press the OPEN/CLOSE button (
5) to close the drawer.
Caution:
• The player will not operate properly and the disc may even be
damaged if it is not set correctly.
• If your finger should get caught in the drawer when it closes,
press the OPEN/CLOSE button (
5).
• Do not place any foreign objects on the disc tray, and do not
place more than one disc on the tray at a time. Otherwise
malfunction may occur.
• Do not push in the drawer manually when the power is off as
this may cause malfunction and damage the TUNER-5CD
CHANGER.
• Do not touch the carousel while it is turning. Also, do not turn
the carousel by hand when it is stopped. Doing so could
damage it.
• Do not insert disc where indicated by arrow.
This could damage the internal mechanism in the unit.
LABEL SIDE
UP WARD
