A SERVICE OF

logo

Open as PDF
next previous
24
Playback Playback
ENGLISH
ENGLISH
You can adjust the picture quality and store the setting you have
adjusted on memory 1-5.
1) During playback, press [MODE].
2) Use [U / V] to select a item to be adjusted, then use [Y / Z]
to adjust the setting.
3) Press [RETURN] to exit.
List of picture adjust item/values
*
1
Not effective for the video signal of HDMI OUT jack.
*
2
Not effective for BD.
Adjusting the Picture
Note
• The setting remains even you turn off the unit.
• You cannot adjust the setting during dialog speed, or when
the pure direct is set to “VideoOff” or “All Off”.
BD-V
DVD-V
DVD-VR
DivX
®
1.Contrast
Noise Reduction
+1
2.Brightness
7. Off
0
Item Description
Adjustment range
(default)
1. Contrast
Adjusts the
difference between
the bright and dark
parts of the picture.
-7 to +7 (0)
2. Brightness
Adjusts the
brightness of the
picture.
0 to +15 (0)
3. Sharpness
Adjusts the
sharpness of the
picture.
-6 to +6 (0)
4. Gamma
Correction
Detailed adjustment
of the picture’s
brightness.
0 to +5 (0)
5. Color
Adjusts the balance
between the green
and red.
-7 to +7 (0)
6. Black Level*
1
Adjusts the black
level.
0 IRE
7.5 IRE
(7.5 IRE)
7. Noise Reduction*
2
Reduces the noise of
the playback picture.
(Off)
+1: Execute MPEG
noise reduction
which reduce the
block noise and
mosquito noise on
the subtitle on
movie.
+2: Execute 3D
noise reduction
which detect and
delete the noise by
comparing each
picture frames.
+3: Execute both
MPEG noise
reduction and 3D
noise reduction.
E5H60UD_EN.book Page 24 Thursday, August 21, 2008 1:54 PM