10
You must connect a TV to the DVD system in order to
use the DVD player. You can connect other audio and
audio / visual components to the DVD system in order
to use the Home Cinema Audio system’s surround
sound capabilities.
ConnectionsConnections
ConnectionsConnections
Connections
Connecting to TV and Additional Components
COA
IAL IN
OR
OR
OR
O
P
T
I
C
A
L
I
N
C
FR
FL
SUBW.
SR SL
L
R
AUDIO OUT
DIGITAL OUT
OPTICAL
S-VIDEO VIDEO
VIDEO OUT
Pr/Cr Pb/Cb
Y
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
S-VIDEO IN
VIDEO IN
Pr/Cr
Pb/Cb
Y
DVD AUDIO OUT ONLY
DOLBY/DTS
TO RECEIVER 5.1 CH INPUT
Important!
- There are various ways to connect the system
to a TV (as shown in the illustration). You only
need to make one of these connections.
- Always refer to the instruction manual of the
connected equipment to make an optical con-
nection.
Connecting to TV
1 Use the supplied audio cables to connect AUDIO
OUT jacks to the corresponding AUDIO IN jacks on
the TV or other audio/visual components.
2 Use Pr/Cr Pb/Cb Y cables (not supplied) to con-
nect Pr/Cr Pb/Cb Y jacks to the corresponding
video input jacks on a TV.
If your TV is not equipped with Pr/Cr Pb/Cb Y video
input jacks, you can select one of the following al-
ternative connections:
Option 1
Connect the S-VIDEO OUT jack to the S-Video in-
put jack on the TV using a S-Video cable (not sup-
plied).
Option 2
Connect the VIDEO OUT jack to the video input
jack on the TV using a video cable (supplied).
Option 3
If your TV does not have inputs for Pr/Cr Pb/Cb Y,
S-VIDEO, or yellow Video jack, use an RF modula-
tor (not supplied) to connect to your TV.
Connecting to Audio Component
Use OPTICAL or COAXIAL jacks
- To enjoy 5.1 channel surround sound, connect to
an amplifier with DTS or Dolby Digital decoder, or,
CD audio recorder. DVD system’ s digital audio out-
put should be set to “ SPDIF/RAW ” (default).
Use DVD AUDIO OUTPUT jacks
- To enjoy 5.1 channel DVD Audio sound, you will
need to connect DVD AUDIO OUT to your analog
5.1 channel inputs on your receiver. To do this, you
will need 3 sets of L/R audio cables (not supplied)
Note
• In addition to 3 L/R audio cables for DVD audio, you
will need either the digital-coaxial cable or the digi-
tal-optical cable to enjoy 5.1 channel Dolby Digital
or DTS sound from your DVD video discs.
Use AUDIO OUT jacks
- For connecting to amplifier, audio system or TV
with analog audio inputs only.
