11
ENGLISH
Operation
Adjusting the projector's elevator
The projector has Front foot for inclinations and Rear foot for horizontals. Spacers
on the each elevator foot are installed at the time of shipment, and projector is in a
condition to be able to just project. If necessary, detach the spacer, and the elevator
feet can be manually twisted to make more precise adjustments.
Displaying and switching the image
Press the INPUT button. Each time you press the button, the projector switches
its input port in turn. You can also use the remote control to select an input signal.
NOTE • The adjustment angle can be adjusted up to plus or minus 1° each
of foot.
•
After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.
If change the setting place of the projector, it will recommend keep and reuse the
spacers.
WARNING ►Keep the spacers away from children and pets. Be careful not
to let them swallow the spacers. If swallowed, consult a physician immediately
for emergency treatment.
CALIBRATION
ASPECT
ACCENTUALIZER
HDCR
AV MUTE
POSITION
ESC MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP
1
2
ENTER
D-ZOOM
-
+
＋
ー
VOLUME
MAGNIFY
MYBUTTON
INPUT
KEYSTONE
TEMPLATE
INPUT button
INPUT button
POWER
LAMP
TEMP
STANDBY/ON
INPUT
MENU
Rear foot
-1~1°
Rear foot
Spacer
Front foot
Spacer
Front foot
0~2°
