A SERVICE OF

logo

6
THE COOLING FAN FOR THE
CONTROLS
Your appliance has a cooling fan fitted behind the
controls to prevent them from overheating.
The cooling fan will come on immediately when the
grill is switched on and after a short time when the
oven is in use.
The cooling fan may run on after the oven or grill is
turned off for a period of time to cool the appliance
down. It may continue to switch on and off until the
appliance is cool.
Always allow the cooling fan to cool the
appliance down before switching off at the
wall prior to carrying out any cleaning or
maintenance work.
NOTE
The action of the cooling fan will depend on how long
the oven or grill have been used and at what
temperature. It may not run on where the grill or
oven has only been used for a short time.
Do not stand to close to the grill or oven
when in use as warm air will exhaust from
the grill cavity and oven vents.
LOCATION
All gas ovens require adequate ventilation.
The room the oven is fitted in must have a
good air supply that meets the standard BS
5440 Part 2 (current edition). Your installer
will tell you if you not sure.
The oven may be placed in a kitchen,
kitchen/diner or bedsit but not in a
bathroom or shower room. It should not be
installed in a bedsit smaller than 20m³.
L.P.G. cookers MUST NOT be installed
below ground level, i.e. in a basement, or
aboard any boat, yacht or other vessel.
The use of a gas cooking appliance results in the
production of heat and moisture in the room in which
it is installed. Ensure that the kitchen is well
ventilated: keep natural ventilation holes open or
install a mechanical ventilation device (mechanical
extractor hood).
Prolonged intensive use of the appliance may call for
additional ventilation, for example opening of a
window, or more effective ventilation, for example
increasing the level of mechanical ventilation where
present.