User Manual
Transferring Files
! Connect the device to a computer with the supplied USB cable. This device will turn on and ask you
if you want to connect it or not. Choose “Connect” to connect it.
! Once connected, two removable disk drivers will show on your computer. One is the internal
memory of the device, and the other one is the memory card inserted into the device. You can copy
files from or to these disk drives just as you would on your hard drive.
! Once the data transfer completes, drag from the top bar downwards to display the USB notification
message as shown
Drag downwards
! Choose “Turn off USB Storage and then tap “Turn Off” to disconnect the device from the computer.
! Disconnect the device from the PC safely
a. Left click the
icon at the right bottom corner of the computer desktop.
b. Click the pop-up mini window message of “ stop the USB Mass Storage Device”
c. Disconnect the device from the computer.
Note: The pre-installed application and Android OS occupies a considerable part of the capacity, it is normal that you
see a difference between available memory space and total capacity.
Turning On/Off
To turn on the device, press and hold the Power button on the unit until you see the Android bar then release.
It may take a few minutes to start up the system, please wait before you proceed.
To turn off the device, press and hold the Power button until you see the option “Power Off”. Tap “Power Off”
and then tap ‘OK”
Tip: This device will sleep with the screen off if it stays inactive for a few seconds. You can briefly press the Power
button to turn on the screen and wake it up.
