65
fig.4.1
fig.3.2
fig.3.1
fig.2.1
3mm3mm
2
Assembling The Glass Holder
• Attach the connecting piece to the glass holder using two screws and space reserved 3mm as shown in fig.2.1.
• Use the same method to assemble the other glass holder
P-C
P-F
B
D
3
Installing The Glass Holder
Insert the two glass holders into the wall plate along the wall plate rail at the desired height respectively, and
then tighten four screws with a 3mm Allen key as shown in fig.3.1 .
Installing The Glass Shelf
4
Place the two glass shelves gently on the two glass holders respectively. Attach the glass shelves to the glass
holders using screws and plastic bushing, tighten screws with a 3mm Allen key but don’t tighten completely at this
time. Center the glass shelves over holes, securely tighten screws with a 3mm Allen key as shown in fig.4.1.
adjustable in height
E
P-E
P-F
• Insert two decorative covers to the top and bottom of wall plate respectively and install four plastic covers
as shown in fig.3.2.
• You can adjust the height of the glass holders as needed. Loosen the screws with a 3mm Allen key (but do
not remove) to adjust the glass holders at the desired height and then tighten screws with a 3mm Allen key
as shown in fig.3.2.
P-F
P-C
P-C
P-D
P-F
P-C
