35W 2.1 Channel Sound bar w/ built-in subwoofer
Ultra-thin 55mm/2.2” deep
Compatible with LED/LCD TV’s
Frequency Response: 50Hz ~ 20KHz
Voltage AC: 100-240V/50-60Hz
Speaker Driver: 3” + 2.5” x 2
Input sensitivity: 850mVrms
Total Peak Power: 60W
USB, AUX in, AUX, MP3 Input
Press Mode button to switch to Bluetooth Mode.
Customer Support
Remote Control
Bluetooth™ Mode
Power button Mute volume
Equalizer
Next track/chapter
Volume up/down
Mode
Select USB/Line/RCA
Number buttons
Reset button
Play/Pause
Previous track/
chapter
USB Mode
AUX Mode
Press Mode button to switch to USB Mode.
Control playback using the play/pause/prev/next buttons.
Press and hold the prev/next buttons to increase/decrease volume.
Playback can also be controlled using the Remote Control.
Playback will stop if the USB drive is removed. The memory function
will continue playback from where it stopped when the USB drive is
inserted again.
Insert your USB Drive. The USB port is on the left side
of the soundbar.
Soundbar will automatically begin
playing music in the order listed on
your USB drive.
Press EQ button while in USB Mode to choose from a
list of preset equalizer options: classical, jazz, movie,
standard, etc.
Press Mode button to switch to AUX Mode.
Connect Soundbar to another device to stream music.
Note: MP3 Line-in and AUX Mode use the same audio input channel.
Both cannot be played at the same time.
Note: EQ function is not available in AUX Mode.
