A SERVICE OF

logo

Page 34
Page 35
EPM-300 Power Module
Rated Power Output:
8 Ohms: 200W RMS
4 Ohms: 300W RMS
Stable to 2 Ohms
Frequency Response:
+/- 0.1 dB: 20 Hz-20 kHz
+/- 3 dB: 10 Hz-100 kHz
Signal to Noise Ratio
(Un-weighted): 100 dB
Distortion (THD):
(20Hz-20kHz): <0.015%
80kHz Measurement Bandwidth
Damping Factor:
(into 8 Ohms): >300
Gain:
(1.7V Sensitivity): +27dB
Input Impedance: >20K Ohms
External Trigger: 5-24VDC
DC Oset: Less than 1mv
Servo controlled
Crosstalk:
Between ANY channels >120dB
XLR Inputs
Pin #1 = Ground
Pin #2 = Positive
Pin #3 = Negative
Power Requirements (All Channels Driven)
120VAC, 60Hz, 4200W
Power Consumption
(Standby) 3 Watts
(At Idle) 60 Watts
Dimensions
EPM-300 2”Wx6.75Hx16”D
MPS-1w/Feet 17”Wx7.75Hx19”D
Chassis Type 5RU chassis
Proprietary card cage
Net Weight
EPM-300 Module 12.125lbs. (5.5kg)
MPS-1 Chassis 33lbs. (15kg)
Technical Specications
Pin #1
Pin #2
Pin #3