4 To select the best color mode, press the Color Mode button on the
remote control (PowerLite W6 Series only). Press it repeatedly to move
through the options.
You can also select the Color Mode setting from the projector’s Image
menu. See the User’s Guide on your CD-ROM for instructions.
See your User’s Guide on the CD-ROM for more information about
image adjustments.
7 Install your User’s Guide
and register your projector
1 Insert the projector CD-ROM in your drive. If the installer doesn’t open
automatically, double-click the Epson CD-ROM icon, then double-click
the Epson installer icon.
2 Select English.
3 Follow the instructions on the screen to register.
NOTE
You can also register at www.epson.com/webreg.
4 After you register the projector, click User’s Guide to install it.
(If you are using Windows and don’t already have Adobe
®
Reader
®
,
click Adobe Reader and follow the on-screen instructions to install it.)
5 When you’re done, click Exit.
To open your User’s Guide, double-click the User’s Guide icon on your
desktop.
Where to get help
Internet support
Visit Epson’s support website at epson.com/support and select your
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Visit http://www.presentersonline.com to access tips, templates, and
training for developing successful presentations.
Speak to a support representative
To use the Epson PrivateLine
®
Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card that came with your projector.
This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a projector
support specialist by dialing one of the following numbers. (Toll or long
distance charges may apply.)
U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday
Days and hours of support are subject to change without notice.
Purchase supplies and accessories
You can purchase screens and other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at www.epsonstore.com (U.S. sales) or
www.epson.ca (Canadian sales).
Connecting with an HDMI cable (PowerLite W6 Series only)
For the best image and sound quality, connect your video equipment to
the HDMI port, if possible.
1 Connect an HDMI cable (not included) to the HDMI port on your
video player and the HDMI port on the projector.
2 Start your video or presentation. Use the Source Search button
on the projector or the Search or Source Search button on the
remote control to select the HDMI source, if necessary.
Connecting with a component video cable
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a
component-to-VGA cable (not included) to connect the projector.
Once you’ve connected the cable(s), start your video or presentation.
Use the Source Search button on the projector or the Search or
Source Search button on the remote control to select the video source,
if necessary.
You can connect an optional audio cable if you want to play sound
through the projector. See the User’s Guide on your CD-ROM for
instructions.
6 Adjust the image
1 To raise the image, press the foot release lever and lift the front of
the projector. Release the lever to lock the foot in the position you
want.
2 Rotate the focus ring to sharpen the image. To reduce or enlarge
the image, rotate the zoom ring (PowerLite 78/W6 Series only) or
press the Wide (enlarge) or Tele (reduce) button on the projector’s
control panel (PowerLite S6 Series only).
3 If your image looks like or , first make sure the projector
is facing the screen squarely. Then, if necessary, press the and
buttons on the projector’s control panel until the image looks
correct.
Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of
Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 6/08
Printed in XXXXXX CPD-25845
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on
your computer or video source, check the following:
Make sure the power light on the projector is green and not
flashing and the A/V Mute slide (lens cover) is open.
Make sure the cables are connected correctly. (See the User’s Guide
for more information.)
If you’ve connected more than one video source, you may need to
press the Source Search button on the projector or the Search or
Source Search button on the remote control to select the one you
want to watch. (Allow a few seconds for the projector to sync up
after pressing it.)
If the projector and the notebook don’t display the
same image
If you’re using a Windows notebook:
Hold down the Fn key and press the function key (such as
or CRT/LCD) that lets you display on an external monitor. On most
systems, the
or CRT/LCD key lets you toggle between the
LCD screen and the projector, or display on both at the same time.
Check your monitor settings to make sure both the LCD screen
and the external monitor port are enabled. From the Control
Panel, open the Display utility. Click the Settings tab, then click
Advanced. The method for adjusting the settings varies by brand;
you may need to click a Monitor tab, then make sure the external
Monitor port is set as your primary display and/or enabled. See
your computer’s documentation or online help for details.
If you’re using a Macintosh
®
notebook with Mac OS
®
X:
1 From the Apple
®
menu, select System Preferences, then click
Display or Displays.
2 Select VGA Display or Color LCD, click Arrangement or Arrange,
and make sure Mirror Displays is checked.
Color Mode button
(PowerLite W6
Series only
Zoom ring
(PowerLite 78/W6 Series only)
Focus ring
