Remote Control
Name Function
A
[ ] button
Press to turn the projector on.
B
[t] button
Press to turn the projector off.
C
Change input buttons
Press to change to signals from each input port.
s "Switching to the Target Image" p.59
The [SDI] button is only available for EB-Z10005U/EB-
Z10000U/EB-Z9875U/EB-Z9870U.
D
[Aspect] button
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image"
p.72
E
[Auto] button
If pressed while projecting analog RGB signals from the
Computer input port or the BNC input port, you can
automatically optimize Tracking, Sync., and Position.
F
[Freeze] button
Press to pause or unpause the images.
s "Freezing the Image (Freeze)" p.95
G
[Test Pattern] button
Displays a test pattern.
s "Displaying a Test Pattern" p.34
H
[Lens Shift] button
Press to adjust the lens shift.
s "Adjusting the Position of the Projected Image (Lens
shift)" p.35
If pressed for more than five seconds, the lens position
returns to the center.
I
[Zoom] button
Press to adjust the zoom.
s "Adjusting the Zoom" p.37
J
[Menu] button
Press to display and close the Configuration menu.
s "Using the Configuration Menu" p.114
Part Names and Functions
20
