Management Using SNMP
By setting SNMP to On in the Configuration menu, notification messages
are sent to the specified computer when a problem or warning occurs. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
s Network - Administrator Settings - SNMP p.98
a
• SNMP should be managed by a network administrator or someone
who is familiar with the network.
• To use the SNMP function to monitor the projector, you need to
install the SNMP manager program on your computer.
• Up to two destination IP addresses can be saved.
Displaying the Web Remote Screen
The Web Remote function allows you to perform projector remote control
operations with a Web browser.
a
Display the Web Control screen.
b
Click Web Remote.
c
The Web Remote screen is displayed.
A
[ ] button
Turns the projector on.
B
Change input buttons
s "Switching to the Target Image by Remote Control" p.42
C
[Freeze] button
s "Freezing the Image (Freeze)" p.64
D
[A/V Mute] button
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.63
E
[Page] buttons
s "Remote Control" p.12
F
[Volume] buttons
G
[Source Search] button
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.41
H
[t] button
Turns the projector off.
Monitoring and Controlling
149
