Part Names and Functions
6
Rear
f EMP-280
Name Function
A
Remote receiver Receives signals from the remote control.
s Quick Start Guide
B
Security slot (j) The security slot is compatible with the
Microsaver Security System manufactured by
Kensington. s p.21
C
Monitor Out port Outputs the image signal from the computer
connected to the Computer1 input port to an
external monitor. This is not available for
component video
g signals or other signals
being input to any port other than the
Computer1 input port.s p.62
D
Power inlet Connects to the power cable.
s Quick Start Guide
B
D
C
E
I
F
GH
A
E
RS-232C port When controlling the projector from a
computer, connect it to the computer with an
RS-232C cable. This port is for control use and
should not normally be used. s p.67
F
Computer1 input
port
For video signals from a computer and
component video
g signals from other video
sources.
Computer2 input
port
For video signals from a computer and
component video
g signals from other video
sources. s Quick Start Guide
G
Audio-L/R input
port
Connects to the audio output port for the
equipment you want to project from and inputs
the audio. s Quick Start Guide
H
Video input port
For composite videog signals from video
sources. s Quick Start Guide
I
S-Video input
port
For S-videog signals from video sources.
s Quick Start Guide
Name Function
