8
Part Names and Functions
Rear
Base
• [InputB] port s page
12
Connects to the RGB port of
• [InputA] port s page 12
Connects to the component video (YCbCr
or YPbPr
) ports or RGB ports of other
video equipment.
• [S-Video] input port s page 12
Inputs an S-Video signal to the
projector from other video equipment.
• [Audio] input port s page 12
These ports input audio signals from connected external
equipment. They serve as common ports for video /
computer, so when using two or more pieces of external
equipment, you will need to disconnect one before
connecting another, or use an audio selector
(commercially-available).
• Remote control
light-receiving area
s
page 13
Receives signals from
the remote control.
• [Video] input port s page 12
Connects to general video ports of
other video equipment.
• Power inlet s page 14
Connects the power cable.
• Security lock () s page 50
• Lamp cover open
switch
• Speaker
• [Control (RS-232C)] port
Connects the projector to a computer using an RS-
232C cable. This port is for control use and should
not be used by the customer.
•
uspens
on
rac
et
x
ng po
nts
3 po
nts
page 44
Install the optional ceiling mount here when suspending
the projector from a ceiling.
• Air filter (air intake vent)
s page 40, 42
Prevents dust and other
foreign particles from being
drawn into the projector.
It should be cleaned
periodically.
• Air intake vent
spage 40
It should be cleaned
periodically.
