Menu Operations - 69
Setting Sleep Mode Sets the energy-saving function for when no image sig-
nals are being input. When this is set at [ON], projection
will be automatically ended and the projector will enter
the sleep mode if no image signals are input and no
operations are performed for a period of thirty minutes
(the operation indicator will be illuminated in orange).
Press the [Power] button to restart projection.
ON
Reset Returns all setting menu adjustment values to the
default values.
Press the [Enter] button and then select [Yes] on the con-
firmation screen displayed.
·Select [Reset All] to return all image and sound values
to the default settings. (see page 70
)
-
Capture User’s Logo
Capture
Registers user logos. (see page 71
)
Press the [Enter] button and follow the instructions dis-
played on the confirmation screen.
·The saving procedure requires a certain amount of time
to complete. Do not attempt to operate the projector or
the equipment connected to the projector while this
procedure is running. Failure to observe this may result
in damage.
·The size that can be registered is 400 x 300 dots.
·The display size will be adjusted when video images
are being projected.
EPSON’S logos
Advanced Language Sets the language with which messages are to be dis-
played.
Press the [Enter] button and select the required language
from the language selection menu displayed.
English
Startup Screen Displays the user logo during warm-up after the power
has been switched on.
·The user logo must be registered and set up before it
can be amended.
ON
Color Setting Adjusts the color temperature of the image.
Absolute color temperature: Sets the color temperature.
RGB: Sets the strength of the RGB colors (red, green and
blue.)
Press the [Enter] key to display the color setup menu,
select the R, G and B items, and then set the required
value.
·Set the color temperature value to the yardstick value.
Absolute color
temperature
7500K
Top Menu Sub Menu Function Default Value
