4
Maintenance and Troubleshooting
4-11
Paprika-U
Rev. C
A5 size CHAP4.FM
10/28/98 Pass 0
R
Proof Sign-off:
<tantoname> _______
<leadername> _______
<editorname> _______
The operate
light does not come on.
Press the
P
operate
button to turn on the scanner.
Make sure the power cord is correctly plugged into the scanner
and the power outlet.
The scanner does not start scanning.
Make sure that the operate light is green (in ready
state).
Make sure that you have selected the correct interface port and
settings with your software. Also make sure the interface board
in your computer is properly installed.
Make sure that the terminator and SCSI ID are correctly set up.
See page 1-12.
If you have other expansion boards in your computer, make sure
that they are not interfering with the interrupt setting of the
interface board for your scanner. (See your computer
documentation.)
The scanner software does not work properly.
Be sure you have correctly installed your software.
Make sure that your computer system meets the requirements,
such as the operating system version, specified for your software.
Confirm that the computer has enough memory for your
software. If your computer has many device drivers, or if you are
running other software at the same time, or using RAM-resident
programs, the computer may not have enough memory available.
(See your software and computer documentation.)
