EPSON PowerLite Home 10 Projector
8 - EPSON PowerLite Home 10 Projector 7/03
4. Click
Mirror Displays in the lower corner of the screen.
One of the monitor icons automatically moves on top of
the other.
If you’re using Mac OS 9.x or earlier:
1. From the Apple menu, select Control Panels, then click
Monitors and Sound.
2. Click the
Arrange icon, and then drag one monitor icon on
top of the other.
Note: If the
Arrange option isn’t available, you may need to select
one of the Simulscan resolution settings. Click the
Monitor icon
and then select a Simulscan resolution from the Resolution box.
(Allow a few seconds for the projector to sync up.)
Using the Remote Control
The remote control uses a line-of-sight infrared signal. It lets
you access the projector’s features from anywhere in the room—
up to 20 feet away. (This distance may be shorter if the remote
control batteries are low.) The projector may not respond to
remote control commands in these conditions:
❏ You’re too far away—not within 20 feet (6 meters)—or not
within 30° to the left or right or 15° above or below the front
or rear infrared receiver
❏ The battery is weak or not installed correctly
❏ Ambient light is too bright, or fluorescent light is shining
into the infrared receiver
❏ Other equipment emitting infrared energy is present (such as
a radiant room heater)
Using the Menus
The on-screen menus let you adjust and customize the projector
features from the remote control:
❏
Image controls the look and quality of the projected image
(from a computer or video source).
❏
Setting lets you set the child lock or sleep mode, adjust the
position and size of the picture, select front or rear
projection, and customize other projector features.
❏
Info provides information about the current projector and
lamp settings.
❏
Reset lets you reset the lamp timer and the projector’s
memory, or return all the menu settings to their factory
defaults.
Click here
Click here
Drag one monitor
icon on top of
the other
Turns projector on
and off
Switch between
different video sources
Cycles through
4 pre-set color
modes
Recalls
settings made
in projector’s
menus
Changes the
picture’s
aspect ratio
Navigate menus
and select menu
items; adjust
volume
Exits the
current menu
or function
Displays or hides
projector’s menus
Turns off audio
and video
Optimizes
images from a
computer
Freezes the picture
and sound
