2-6
Printing with EPSON Stylus RIP for Macintosh
To select the proper PPD file and Chooser settings, follow these
steps:
1. Turn on your EPSON printer, and if it is connected to a
network, turn on the print server Macintosh.
2. Double-click the
StylusRIP Server
icon in
the Stylus RIP folder to start the EPSON
Stylus RIP Server. (In a networked
environment, the Stylus RIP Server icon is located on the
hard drive of the print server Macintosh.)
3. On the Macintosh you wish to print from, open the
Chooser in the Apple menu. Click the
AdobePS
icon, and
select
StylusRIP Server
from the printer list. Make sure
AppleTalk is active, even if you are not connected to a
network.
Caution:
You must turn on AppleTalk or the Stylus RIP software will not
work, even if you are using a standalone system.
Click the AdobePS
icon first . . .
then select the
StylusRIP Server
printer . . .
then make
AppleTalk
Active, even if
you aren’t
printing on a
network
Nflight.bk Page 6 Friday, September 1, 2000 8:32 AM
