Network Menu
72
Soft Keyboard Operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed.
Use the [h] button on the remote control or [w/], [v/], [</],
and [>/ ] on the projector to move the cursor to the desired key, and
then press the [Enter] button to enter the alphanumeric. Enter figures by
holding down the [Num] button on the remote control, and pressing the
numeric buttons. After inputting, press [Finish] on the keyboard to
confirm your input. Press [Cancel] on the keyboard to cancel your input.
• Each time the [CAPS] key is selected and the [Enter] button is pressed,
it switches between uppercase and lowercase letters.
• Each time the [SYM1/2] key is selected and the [Enter] button is
pressed, it switches the symbol keys in the section enclosed in the box.
