DRAM Configuration
Select DRAM Configuration from the Frequency/Voltage Controls menu and
press
Enter to display the DRAM Configuration menu. This section allows you
to configure the system based on the specific features of the installed chipset.
Change these settings only if you are familiar with the Chipset. We recommend
that you leave this at the default value.
Figure 12. DRAM Configuration Menu
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:O
timized Defaults
` DRAM Timing Setting [Press Enter]
Timing Mode [Auto]
x Memory Clock Value or Limi DDR 400
DCTs Mode [Unganged]
CKE Base Power Down Mode [Disabled]
CKE Base Powerdown [Per Channel]
Memclock tri-stating [Disabled]
Memory Hole Remapping [Enabled]
Auto Optimize Bottom IO [Enabled]
x Bottom of [31:24] IO space D8
Bottom of UMA DRAM [31:24][FC]
Item Help
Main Level ``
Phoenix – AwardBIOS CMOS Setup Utility
DRAM Configuration
