EVGA X58 FTW3 Motherboard
54
Reset Configuration Data
This function on the PnP/PCI Configuration menu allows you to enable or
disable the resetting of Extended System Configuration Data (ESCD) when you
exit Setup. Set this to [Enabled] if you have installed a new add-on and the
system reconfiguration has caused a serious conflict that prevents the OS from
booting. The default setting is [Disabled].
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if the
BIOS can automatically configure all the boot and plug-and-play compatible
devices or if you can manually select IRQ, DMA, and memory base address
fields. Select
[Auto(ESCD)]
if you want the BIOS to automatically populate
these fields. If you select
[Manual]
so you can assign the resources,
IRQ
Resources
is enabled for input.
IRQ Resources
To enable this field for input, set
Resources Controlled By
to
[Manual]
. With this field enabled, press Enter to see options.
IRQ-5 assigned to [PCI Device]
IRQ-9 assigned to [Reserved]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
IRQ-12 assigned to [PCI Device]
IRQ-14 assigned to [PCI Device]
IRQ-15 assigned to [PCI Device]
Resources Controlled By [Manual)]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter
