Model 380652 Version 3.0 June 2005 3
Meter Description
1. Measuring Jaw
2. Jaw Trigger
3. 20A / 200A AC Select Switch
4. DCA Zero Adjust Dial
5. Power/Data Hold Select Switch
6. AC / DC Select Switch
7. Volts / Amps / Resistance Select Switch
8. LCD display
9. Input Terminal for Voltage
10. COMMON input terminal
11. Resistance Input Terminal
Safety
1. Ensure that the DC 9V battery is connected correctly to its snap terminal and placed in
the battery compartment.
2. Slide the ‘Off/On/Hold’ switch to the ON position, (except when using the DATA HOLD
function).
3. Place the RED test lead into the proper input terminal before making measurements.
4. Remove the test leads from the circuit under test when changing the measurement
range.
5. Do not exceed the maximum rated input voltage.
6. Always put the ‘On/Off/Hold’ switch to the OFF position when the instrument is not in
use.
7. Remove the battery when the instrument is to be stored.
8. International Safety Symbols:
