12
Observe the following instructions:
Work in corners and on edges tends to sub-
ject the tip to increased stress and results in
increased heat development. In such cases,
work with reduced contact pressure.
Delta sanding pad DSS-GE-STF-RO90 -
Fig. [7]
If the front tip of the StickFix pad
[7-1]
of
your delta sanding pad is worn, take it off
and turn it 120°.
Slat sanding pad LSS-STF-RO90 - Fig. [8]
If the StickFix coating of the slat sanding pad
is worn, the complete table can be replaced.
Open the screws to do this
[8-1]
.
Attaching sanding accessories
The suitable StickFix sandpaper and StickFix
sanding cloth can be attached quickly and
simply to the StickFix sanding pad.
click
