![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/3b/c3b61a45-190a-42a0-8ef3-ffa2edec890e/c3b61a45-190a-42a0-8ef3-ffa2edec890e-bg6.png)
-3-
SeriTek/1VE2+2 Specifications
General System
Hardware
Requirements
• PCI based Power Macintosh with available PCI
expansion slot
• PCI-X 1.0a compliant 64-bit at 133/100/ 66MHz bus
speeds. Backward compatible with standard 32/64-
bit PCI at 33MHz and 66MHz bus speeds.
Operating Systems
Supported
• Mac OS 9.xx
• Mac OS X version 10.1.5 or later (works best with
10.2 or later)
Bus Types
• 32/64 bit, 33/66MHz PCI
• 133/100/66MHz PCI-X
• Compliant with PCI bus version 2.2
• Compliant with PCI-X bus version 1.0a
External
Connectors
• 2 shielded external, 2 internal Serial ATA (SATA)
interface connectors support up to 2 external hard
drives and 2 internal hard drives
Drive Types
Supported
• Serial ATA hard drive
• Backward compatible with Ultra DMA 133/100/66
hard drives*
ATAPI Device
Support
• Yes*
Data Transfer
Rates
• Up to 150 MBytes/second or 1.5Gbits/second burst
data transfer rate
Drive Modes
Supported
• Serial ATA
• UltraDMA modes 6/5/4/3/2/1/0
Advanced Data
Features
• Fully compliant with Serial ATA 1.0a specification
• Bus Mastering off-loads data I/O handling from CPU
• Complete 32-bit CRC error checking, for all bits
transmitted (command, data, and status), offers
enhanced data protection for high-speed Serial ATA
drives
• Four independent data channels allows for separate
device timings
• Automatically identifies and configures drive types*
• Automatically detects and supports devices utilizing
many transfer modes including UltraDMA
6/5/4/3/2/1/0
Onboard Flash
ROM
• Allows easy upgrades to the latest firmware
Cables Supported
• 7-pin SATA cable
Warranty
• Two year limited parts & labor
Physical
Dimensions
• 163mm(L) x 1.6mm(W) x 64.4mm(H) (not including
bracket)
Power
Requirements
• 5V ± 5%
Environmental
• Temperature:
Operating: +5°C to +55°C
Non-Operating: -25°C to +70°C
• Relative humidity:
Operating: 20% to 80%
Non-Operating: 15% to 90%
EMC Compliance
• EN55022/1998, EN55024/1998 (European
Community)
• FCC Part 15 Class B (US)
* IDE to Serial ATA converter module required for Parallel ATA and Ultra ATA133/100/66 drives